Project E46 330i Touring

Dewald Basson

///Member
Maybe put the car ons jack stands had it have rotate the wheels, blip of throttle you might be able find the noise? Remove the wheels so have less spinning mass. And be gentle on the throttle.

It sounds hell of a risky but that is what I would do. :hammerhead:

Have looked at or replaced wheel bearings?
 

evnmopwr

Well-known member
Tinuva said:
Woah. At first I thought I only hear the awesome engine rumble. But you were not joking about the whining noise. I have never heard that one before.

If you sit in the back of the car when someone else drive it, could you not hear more accurately where it is originating from? The great thing about a touring is, at least you can put the seats down, unlike the sedans where if it sounds from the boot you cant pin point it from the back seat.

NOONE IS ALLOWED TO DRIVE I BUT ME!!! LOL..

I guess im going to have to start Fault finding.
I sent the Old diff away to get checked out.
I drove the car last week to langebaan for the Week and she drove fine. other than the annoying noise.

Im going to see this weekend to get my bro to drive while i sit at the back and listen..

Im thinking of Tapping a stethoscope to each trailing arm rears and listening while someone drives.
Will do the diff also... and maybe the gearbox too, incase its the output shaft bearing.

Now to find a scope long enough ....


Dewald Basson said:
Maybe put the car ons jack stands had it have rotate the wheels, blip of throttle you might be able find the noise? Remove the wheels so have less spinning mass. And be gentle on the throttle.

It sounds hell of a risky but that is what I would do. :hammerhead:

Have looked at or replaced wheel bearings?

I have tired that, With traction off ofcourse but it seems like the wheels must be on LOAD in order to hear the Noise..

I layed under the car with a scope, with the wheels in the air and cousin took the speed up to Between 80 and 100 and lifted off throttle and could not replicate the issue...:dunnoanymore:

(I LOVE DOING RISKY THINGS) LMAO

About the bearings, This is what makes me think its the rear left trailing arm bearing...
Remember the rear right Castor was out?? and i found it to be bent??
That 330i had suspension Damage..
See what the Rear left looked like after ripping the Wishbone up:

16ldw7d.jpg


another thing i remembered, The Rear side shaft had to be M$%Red in to the up splines. It did not slide in with ease like it was supposed to...

I scouting for another full rear left trailing arm and im going to replace that whole arm. then see what happens

Silly oversight from my end.

Thanks for the input thus far guys.


So after being on leave for the month of April, I decided to swop the "New" panels and lights to my touring..

In progress:

2zoy8o1.jpg


Also, while i was on holiday, My cousin decided to spoil me with these Plates.
Registered the New Cape Town Custom plates

2pqwbuu.jpg


Will post up pics of the Car with the Fresh, str8 new panels tomorrow
Replacing the Steering rack this weekend, including the Rack ends, Stabalizer links, Shocks etc etc..

Need to remove the Side skirts and front bumper to prep for Primer...
Im toying with the Idea of Spraying the car in Hockenheim Silver. but will mix up a sample and see what it will look like. I may have Messing Metallic Paint for sale soon if i change my mind on the colour.
 

individj

Well-known member
dig the plates...now for customs to make the 1 look like an i...think that will def be the problem with the suspension...i must ask if you have spare bolts etc. to mount the radiator...
 

evnmopwr

Well-known member
individj said:
dig the plates...now for customs to make the 1 look like an i...think that will def be the problem with the suspension...i must ask if you have spare bolts etc. to mount the radiator...

I really hope so. Do not want to remove and Strip the gearbox for bearings.
So waiting on my guy to confirm he still has the rear left arm. will cost me about R900 for it so will do that first.

As for Radiator bolts, yup. should have. will scratch them out and you can maybe fetch this weekend (no charge ofcourse). Will let you know when i have them ready

maybe post image from RealoEM marking which you need
 

individj

Well-known member
ok thanks but na will make it worth your while...(ok no that sounds like you're getting a handy or something bwahaha) ja will have to look...this monkey doesn't know where the bolts are and i have no clue how it bolts up.
 

evnmopwr

Well-known member
danieltau said:
Hope you can find the cause of the noise, what exhaust are you running?

hope so too

i have stock Cats at the Headers
Decatted in the center.
Original 330i middle/small box
SPEED brand rear box

nice deep v8ish sound with pops and crackles on deceleration. lol
Not raspy at all


individj said:
ok thanks but na will make it worth your while...(ok no that sounds like you're getting a handy or something bwahaha) ja will have to look...this monkey doesn't know where the bolts are and i have no clue how it bolts up.

LMAO....

Will check on mine and get the bolts ready for you..

Thanks
 

evnmopwr

Well-known member
Front Fitted.. in need of a decent wash..

Also had a visitor with a MINTER!!! :praise:

qxkryh.png


Plan now, for when i have time, is to remove the front and rear Bumpers and the sidskirts.

I want to prep them and get primer on them..

Then i can decide when to paint the car.
Or maybe Wrap it till i can decide what color i want.. :eek:mgwaiting:

Thanks for looking
 

evnmopwr

Well-known member
The SO is so going to Beat me up this evening.... :fencelook:

I was just supposed to fit new tires ..... :fencelook:

This is how quickly one can get carried away ...

So i got:
* new tires
* New brakes+pads front and rear
* New stabalizer links Left and Right
* New Rackends
* New Tie rods
and a few other stuff that i "needed"

:skit:

Pics to follow /...
 

evnmopwr

Well-known member
10K+ later,

24ovkf8.jpg

2e1zt48.jpg

2dl28td.jpg


CAR DRIVES LIKE A DREAM!!!!!

Gosh, amazing what a refresh to these bits can do to the drive of a car..

ofcourse, with good news comes bad news.

Whining/Humming noise has been diagnosed..

Definitely a Bearing in the gearbox.. :(

So its either a Remove and repair story

OR

Its replace with a second hand 6 speed manual

Thanks to all who assisted in diagnosing

PS, Those are the OLD tires in this pics.
 

Dewald Basson

///Member
evnmopwr said:
Front Fitted.. in need of a decent wash..

Also had a visitor with a MINTER!!! :praise:

qxkryh.png


Plan now, for when i have time, is to remove the front and rear Bumpers and the sidskirts.

I want to prep them and get primer on them..

Then i can decide when to paint the car.
Or maybe Wrap it till i can decide what color i want.. :eek:mgwaiting:

Thanks for looking

Shot for the spares and the chat.


It's only "mint" when viewed from the left side :roflol:
 

individj

Well-known member
evnmopwr said:
10K+ later,

24ovkf8.jpg

2e1zt48.jpg

2dl28td.jpg


CAR DRIVES LIKE A DREAM!!!!!

Gosh, amazing what a refresh to these bits can do to the drive of a car..

ofcourse, with good news comes bad news.

Whining/Humming noise has been diagnosed..

Definitely a Bearing in the gearbox.. :(

So its either a Remove and repair story

OR

Its replace with a second hand 6 speed manual

Thanks to all who assisted in diagnosing

PS, Those are the OLD tires in this pics.

jeepers...this makes me happy
 

evnmopwr

Well-known member
Dewald Basson said:
evnmopwr said:
Front Fitted.. in need of a decent wash..

Also had a visitor with a MINTER!!! :praise:

qxkryh.png


Plan now, for when i have time, is to remove the front and rear Bumpers and the sidskirts.

I want to prep them and get primer on them..

Then i can decide when to paint the car.
Or maybe Wrap it till i can decide what color i want.. :eek:mgwaiting:

Thanks for looking

Shot for the spares and the chat.


It's only "mint" when viewed from the left side :roflol:

:biglol:. the dent isnt that bad dude..
you welcome round anytime


individj said:
evnmopwr said:
10K+ later,

24ovkf8.jpg

2e1zt48.jpg

2dl28td.jpg


CAR DRIVES LIKE A DREAM!!!!!

Gosh, amazing what a refresh to these bits can do to the drive of a car..

ofcourse, with good news comes bad news.

Whining/Humming noise has been diagnosed..

Definitely a Bearing in the gearbox.. :(

So its either a Remove and repair story

OR

Its replace with a second hand 6 speed manual

Thanks to all who assisted in diagnosing

PS, Those are the OLD tires in this pics.

jeepers...this makes me happy

LOL... This time im not going to scout for another car just for the gearbox.. LMAO:roflol:
 

individj

Well-known member
:eek:mgwaiting:


i reckon that depends on the price hey...never say never...might just get that little spanner in the toolkit....so a gearbox and spanner :roflol:
 

evnmopwr

Well-known member
individj said:
:eek:mgwaiting:


i reckon that depends on the price hey...never say never...might just get that little spanner in the toolkit....so a gearbox and spanner :roflol:



HAHAHAHHAHA
 

evnmopwr

Well-known member
ok so my touring's Roof lining Finally started Sagging :blueCry:

Plans for this weekend will be to remove the roof lining and DIY redo it.

Will post up some images of the process for whoever needs this done..

1 job im not looking forward to. LOL

Wish me luck
 
Top