Rennzport's smallest power MOD for all (manual) vehicles

[Rooi_Willie]

Well, I installed mine this week (in about 30s) :rollsmile:

Only got to drive her yesterday afternoon, and there is quite a difference when you're rapidly changing gears. I think this might help a couple of guys to up their 0-100 times! :rollsmile:

During normal driving you don't really notice the difference, but once you start some rapid shifting, it's all smiles cause you know exactly when to change! :thumbs:

R150 mod......... DONE!

 

[Twinz]

Thx for the feedback :thumbs:

Will do the mod for Philip tomorrow at the breakfast run :thumbs:

 

[Philip Foglar]

Thx for the feedback :thumbs:

Will do the mod for Philip tomorrow at the breakfast run :thumbs:

Thanks Charles! Yep, look forward to this adjustable one! :thumbs:

 

[Rooi_Willie]

And the pbx?

 

[Philip Foglar]

And the pbx?

Is in!! :rollsmile:

Filled up after installation and have already done roughly 60km just getting the feel of it, so still needs to settle in I reckon. :thumbs:

 

[RenVilo]

Can I fit this with motorplan and still keep it? If so where do I order

 

[Twinz]

It's a cosmetic mod. The clutchstop is too small to be an issue. Install, enjoy and forget about it. :thumbs:

 

[moranor@axis]

i really doubt any bmw techy will know the difference...

 

[Philip Foglar]

It's a cosmetic mod. The clutchstop is too small to be an issue. Install, enjoy and forget about it. :thumbs:

Actually forgot about this on the last run, will have to get this installed another time. Very keen to also try the CDV modified valve a try...

 

[KarshS]

Hi Guys,

I installed mine but the car doesnt want to start. Must i make clutch stop smaller by removing some of the washes?

Its an E90 325i

 

[Twinz]

Yes, remove one.

 

[skiet]

Hi Twinz,

Does this work on the new f30?

 

[Twinz]

Skiet. Not sure. You will have to remove the stock stop...and if it looks similar to the pic in my first post then yes, the bms one will fit.

 

[bmsportzn135i]

Twins, please you must put a post up when you get these back in stock!

 

[michaelniszl]

I'm sorry but there is no way that price can be justified, after reading it I went to the garage and found a few nuts, bolts and rubber washers and it works 100% and it cost nothing.

 

[Coisman]

I'm sorry but there is no way that price can be justified, after reading it I went to the garage and found a few nuts, bolts and rubber washers and it works 100% and it cost nothing.

Good for you buddy!! :bravo:

 

[Josh-ZN]

I'm sorry but there is no way that price can be justified, after reading it I went to the garage and found a few nuts, bolts and rubber washers and it works 100% and it cost nothing.

tell me where you get nuts bolts and rubber washers for free. i would also like to shop there.

 

[Twinz]

Thx Cois...

I wonder what he will say if he knows the price has trippled :roflol:

 

[Coisman]

Thx Cois...

I wonder what he will say if he knows the price has trippled :roflol:

:spit: :biglol: OUCH!!! :roflol:

 

[Josh-ZN]

I'm sorry but there is no way that price can be justified, after reading it I went to the garage and found a few nuts, bolts and rubber washers and it works 100% and it cost nothing.

i have an idea, lets forget the fact that these things are imported from a well known, highly respected bmw focused tuning company who supplies quality products. why dont you make a whole lots of these things, or better still, get a manufacturer to make a whole lot which will be better quality than the ones you make in your garage, and then sell them for less than R150. hey why not just give them away for free.

:flyfun: