So, went back to the drawing board today. The rears were touching a bit, so upon inspection, noticed that the rear camber was set to -1.5deg and not -2.0deg as requested. I wasn't particularly happy about how far in the front was sitting as well.
The solution:
Camber in the rear set to -2.6deg
Front camber still on -1.0deg, however I added a 5mm spacer on each side. Tried the 8mm which would be ideal, but the bolts are too short. I could fit longer bolts, but that would mean carrying around two locknuts which I see as impractical.
Anyway, here's the look after the new adjustments:
Rear fitment with a bit better gap for travel
Front fitment decent, however could be more, but I'll leave it as is for now.
An idea of the rear concave
A before and after
Next steps:
- fit carbon spoiler
- fit a single exit diffuser
- source a boot spoiler
:coolshake:
Thanks for all the kind words and advice thus far guys :blowheart:
Sent from my iPhone 6+ using Tapatalk
raise:
