Iceman007
Active member
After clearing memory faults these remain hard faults and will not clear. could the LIN bus be the cause of the shifting?
Fault code memory list
Fault code Description
0049A5 LIN bus : Communication fault
00A66E FZD: Interior lights in rear
Following LIN bus communication fault code is logged:
49A5 LIN bus : Communication fault
Permanent fault
Frequency:1
Healing counter:0
Possible fault causes: Short to B+, short to ground in LIN bus wiring
harness / in one of the connected LIN bus users.
The fault status is read out in the next test step.
False
Engine control unit LIN bus function check:
Fault status is continuously read out. The status changed within 90
seconds.
Current fault status | :
49A5 LIN bus : Communication fault
Permanent fault
For this, individually disconnect the installed LIN users on the engine
control unit (see wiring diagram). If the fault code memory status
changes to "currently not present"the cause of fault is in the disconnected
user/section of wiring harness. If the fault status does not
change, another bus user may be defective, the main wiring harness
damaged or the engine control unit defective.
Important: At least one bus user must remain connected otherwise
the status of the communication fault will remain "currently present".
If the status does not change, unplug the last user and connect a
different bus user.
True
If the communication fault still persists, disconnect all users and check
the line and plug connections for short-circuits.
Check following lines and plug connections:M_LIN
False
Operations report 08/01/2016 4/6
Any advise
Fault code memory list
Fault code Description
0049A5 LIN bus : Communication fault
00A66E FZD: Interior lights in rear
Following LIN bus communication fault code is logged:
49A5 LIN bus : Communication fault
Permanent fault
Frequency:1
Healing counter:0
Possible fault causes: Short to B+, short to ground in LIN bus wiring
harness / in one of the connected LIN bus users.
The fault status is read out in the next test step.
False
Engine control unit LIN bus function check:
Fault status is continuously read out. The status changed within 90
seconds.
Current fault status | :
49A5 LIN bus : Communication fault
Permanent fault
For this, individually disconnect the installed LIN users on the engine
control unit (see wiring diagram). If the fault code memory status
changes to "currently not present"the cause of fault is in the disconnected
user/section of wiring harness. If the fault status does not
change, another bus user may be defective, the main wiring harness
damaged or the engine control unit defective.
Important: At least one bus user must remain connected otherwise
the status of the communication fault will remain "currently present".
If the status does not change, unplug the last user and connect a
different bus user.
True
If the communication fault still persists, disconnect all users and check
the line and plug connections for short-circuits.
Check following lines and plug connections:M_LIN
False
Operations report 08/01/2016 4/6
Any advise