2000 318i E46 speedometer problem

[moke46]

Hi all please help my car speedometer go all the way up when driving with no DSC and ABS warning lights come on at all. i try changed new sensor on rear left wheel and still having same problem any ideas what could be wrong?
Thanks

 

[Crash_Nemesis]

:slow: WTF did I just read?

 

[zaleonardz]

Yea

Its impossible for a speedo on a 318 to go all the way around

 

[Mr Occo]

Yea

Its impossible for a speedo on a 318 to go all the way around

Mine only goes to 199.99 km/h.... wonder if I have a problem too......

:biglol::biglol::biglol:

 

[CamZo]

lol who posts that picture that says "DA Faq did I just read"

 

[moranor@axis]

try the front speed sensor also...

 

[moke46]

try the front speed sensor also...

I try disconnected each sensor and problem stiil there also warning light come on only when disconnected L/R one the speedometer will not work Also warning light come on ?

 

[moke46]

Here you go who want to racing with me?

moke46

 

[moranor@axis]

i would have the codes read and see what comes up...

 

[Mr Occo]

I wouldn't, very cool party trick!

:roflol:

 

[frikkieh]

Yea

Its impossible for a speedo on a 318 to go all the way around

Mine only goes to 199.99 km/h.... wonder if I have a problem too......

:biglol::biglol::biglol:

MMMM that explains a few Youtube vids :biglol:

---

Here you go who want to racing with me?

moke46

Juged by the RPM, (your new speedo) you can't be too fast. :rollsmile:
This reminds me of a test like this:

From this you can see that everything is under electronic control, therefore, it can be a faulty cluster.

Perform test 2:

1. with the ignition off, hold the left instrument button
2. turn the key to position 1 (radio)
3. If you let go of the button and press again you will cycle through the following 20 tests.
4. If you want to acess the submenus, release the button while a test menu number is being diplayed, within a second, you will see Test number.0. You can then click again to cylce through the submenus. To get back to the main menu, press and hold the left key until you see the test number without the ".0".
5. Note, you can only access tests 1 and 2 without unlocking-- to unlock the other tests, go to test 19 and wait for the display ot say "l-off", then click again. Now you can cycle through to the other tests


Test 1 (Vehicle specific data)
Sub Menu Sample Output Meaning
1.0 12345 VIN
1.1 4812 Body number
6_1.2 834762 Part number of cluster
1.3 010203 Coding/diagnosis/bus index
1.4 3499 Build date (week/year)
1.5 04_600 Hardware/software version of cluster
3_1.6 415_06 Injection status

Test 2 (instrument cluster test)
Test 3 Service INterval data
3.0 1500 Liters
3.1 0 Periodic Inspection days (NA to US)
Test 4 (Fuel consumption data)
4.0 0267 26.7 liters/1000km
4.1 0073 7.3 liters/hour
Test 5 (Fuel consumer/ distance traveled)
5.0 0195 9.5/liters / 100km
5.1 226 Distance left to go
Test 6: Fuel level sensor input in liters
6.0 237415 Fuel level: Left side fuel sensor 23.7 liters RIght side: 41.5 liters
6.1 0652 Tank level: 65.2 liters
1_6.2 0667 Indicated value and tank phase 1- both sensors ok 2- one sensor fault 3 implausible input
Test 7 Temp and speed
7.0 032 Coolant temp input = 32 C
7.1 245 outside temp: 24.5 C
7.2 5283 Engine SPeed 5283
7.3 058 Vehicle speed
Test 8
Input vaues in HEx code
8.0-8.3 XXX Hex code, instrument cluster inputs
Test 9 Batter voltage
9.0 125 12.5 volts
Test 10 Country coding
10.0 02 US (=02)
Test 11 Cluster code
11.0 0000003 Cluster code
Test 12 Not used
Test 13 Gong test Activate gong by presing button (gong response is delayed)
Test 14 Fault memory
Test 15-18 not used
Test 19 Lock/ unlock other tests
Test 20 Avg fuel consumption correction
20.0 Pressbutton when correc 1s position in attained
20.1 Press button when correct 10s position is attained
20.2 Press button when correct 100s position is attained
Test 21 Software reset

 

[moke46]

tried 7.3 test but speed number just Increase same as speed needle
and just Perform test 2 everything seem to be all working .now just have to wait for my Diagnostic Tool arrived hoping can read out any errors codes.
moke46