Replaced rear break pads -advise needed

[flyhid]

Replaced rear break pads but i now have this squeaking sound when I brake.
I tried the brake cleaner the noise goes away for awhile but returns after a few km.

 

[Carbon M3]

Put in copperslip wherever the pad makes contact with the caliper.
:thumbs:

WARNING: DO NOT PUT BETWEEN PAD AND DISK

 

[flyhid]

Hi there

The noise doesn't seem to between the break pad and the caliper .its only there when the pad rub against the disk. I replaced the pads because of the anti rattle clip that was making a rattling noise .

Thanks

 

[Coisman]

What make pad did you replace the old ones with??

 

[flyhid]

What make pad did you replace the old ones with??

Hi

I replaced them with Boch pads the oke at the spare shop said they were not hard pads.
I previously had ATE pads.

 

[Coisman]

OK, cause I replaced my brakes recently with Bilstein, and every now and then they will squeak... :thinking:
Maybe there are some hard particles inside the pad, and its this thats creating the squeak? :dunno:

 

[Carbon M3]

Hi there

The noise doesn't seem to between the break pad and the caliper .its only there when the pad rub against the disk. I replaced the pads because of the anti rattle clip that was making a rattling noise .

Thanks

Good quality pad surfaces are engineered not to squeak between pad and disk, unless they have become glazed from abuse.

Don't worry were you think the sound is coming from :fencelook:

Copper slip has always silenced squeaky brakes for me, be it in a Corsa or a Merc

 

[flyhid]

OK, cause I replaced my brakes recently with Bilstein, and every now and then they will squeak... :thinking:
Maybe there are some hard particles inside the pad, and its this thats creating the squeak? :dunno:

Thanks will try the copper slip.....

Noise is annoying........

 

[AcidBurn]

maybe you should have your disks skimmed:idea:

 

[calypso]

Bedding procedure?

 

[Bazza]

Copper Slip works! It sounds like it's the pad squealing against the disc but it's actually the vibration of the pad in the caliper when the brakes are applied. This normally happens with a very hard compounded pad I found.

 

[Epoc]

Have the same problem ... installed Bosch pads and have squeaked ever since, just waiting till they are finnished then using another brand.

Tried the following:
1) Removed pads and slapped on copper grease .. no luck.
2) Skimmed discs .. no luck.
3) Grinded the sides of the pads like originals from BMW .. no luck.
4) Followed bedding procedures .. no luck.

Personally I think these Bosch pads are $@#!

 

[Coisman]

Guys, like I said, my brakes dont make the noise all the time, only sometimes, and then it will last for a few days, and gone again, which is why I say I think it might be hard bits inside the pad itself?? :dunno:

 

[skiet]

Guys, like I said, my brakes dont make the noise all the time, only sometimes, and then it will last for a few days, and gone again, which is why I say I think it might be hard bits inside the pad itself?? :dunno:

I had the same problem and I believe now you get what you pay for... Went for the ferodo's and they were half the price but squeeked forever!!

Must be compound in the pads it sounds.. Anyways good luck with it cause squeeking breaks make me mad!!:argh:

 

[kugs330]

Use ATE i use them on all my vehicles no problems :thumbs: