-
Read the WELCOME ALL BMWFANATICS post.
Psypher13 335i N54 e92 DCT Build
- Thread starter Psypher13
- Start date
Rayzor
Well-known member
Coming along nicely bro, I said this before and will say it again, dont change the color of the cab. Black looks so sweet especially with the current updates you have done.
As for the "all in one" fitment for mods, Its going to make fault finding much more difficult if you do pick up errors. :thumbs:
Cant wait to see this car done and running stronger than before. :smilebounce:
As for the "all in one" fitment for mods, Its going to make fault finding much more difficult if you do pick up errors. :thumbs:
Cant wait to see this car done and running stronger than before. :smilebounce:
Psypher13
Active member
Rayzor said:
Shot Ray
Yeah - im leaning towards a Blow Over on the car
2 options is colour code everything black including Bonnet
or blow over and just add more carbon bits like Mirror covers
wrap Lip in carbon
still undecided on that
As far as mods go - you know me
chances are that i will be Close to FBO before you know it
Just need the DCI and CP+BOv
then i can run a Stage 2+ MHD till i can get a JB4 and Meth again
Chrism135i
Member
awesome thread bro, you are definitely the epitome of a fanatic:thumbs:
General.Massacre
///Member
damn Shayne, back to basics i see. im loving the look.
the Carbon hood looks amazing, and i think the Arkym lip will finish it off very very well.
this car has gone through so many personalities. good man.
look forward to the next chapter.
the Carbon hood looks amazing, and i think the Arkym lip will finish it off very very well.
this car has gone through so many personalities. good man.
look forward to the next chapter.
Great to see you kept her and giving it all the attention it deserves.
Love the current look bro
Sent from my SM-N950F using Tapatalk
Love the current look bro
Sent from my SM-N950F using Tapatalk
Psypher13
Active member
Hey guys
It has been a while and its about time for an Update on my baby
From the last time i posted i mentioned that
Next on list is to Collect more of the FBO mods to fit later
- This is still on the go, Only need JB4 and DCI now and maybe the Aluminum Intake Manifold
Perhaps the M4 Bumper install
- Opted not to fit the M4 bumper
- Instead i fitted the M3 bumper
Def the E92 M3 Electrical Mirrors again
- Found a set and fitted to the car
And a Carbon clean
- This still needs to be Done maybe when i decide to buy the Aluminum Intake Manifold onetime
I also got lucky in that i was able to Find my OEM AA FMIC and had that fitted as well as my Custom performance exhaust that was Build by TnT - Tom
- Dual 3" with custom high flow boxes
- Its also has 101mm Silver tailpieces of which i will be replacing with my 101mm Burnt Blue tips i got from Rennzport
I also mentioned that i may want to change the colour of her if not have a blow over done
I had a chat with Moe from CrazyridesDetailers and he advised that he could not restore the paint as it was way too badly damaged.
So the only options i was let with was to ether do a blow over or to change the colour.
After some deliberation i finally pulled the trigger and decided to have the colour changed.
Alot of you know that i have been toying with this idea for ages now and toying as to what colour to go with --Red, Green, Yellow....etc
Finally i found a colour that just caught my eye
Atlantis Blue - Got it from the IndiBlue build that was done over seas.
I approached Custom Spray Worx and they said they would be able to Spray the car for me - I opted to respray as apposed to Wraping.
(Easier to maintain if Scratched)
With the request i asked for Colour change to car as well as Gloss black Accessories
So all Beading were made Gloss black, Rear Performance apron, Roof Fin, Side indicator Makers and M3 Mirror Housing. i also request that we colour code bits of the Engine bay Covers.
I waited a solid month and half before i got her back. i had not seen any progress on her in person, ONLY pictures that were sent to me every now and then.
With nerves kicking and anxiety as to how she would look i could not handle it.
and finally the day came when she was ready and i could go and collect her and boy oh boy i was like a kid on Xmas Day....:inlove::inlove: when i arrived and saw her parked off waiting for me...
Perfection at its best. i could not fault a thing. the job was of highest quality and well worth the wait.
here are some picture of the progress over time and final result.
Some Striped and busing being prepped
Some During the Progress Pictures
AND FINALLY THE END PRODUCT
Just an ARB mod on the rear Brake Light
Next on the to-do list
* General Service
- Oil Change, New Ngk 1 Step Colder Plugs, Filters etc
* Trip to Moe crazyridesdetailer for a Fullhouse (Car will need to cure a bit longer before though)
- Full Detail inside out
- Full Engine bay Clean up
- Rim Clean up
- Full 5 Yr Ceramic Coating
* Carbon clean (Still undecided if i will DIY or take in )
* Vosteiner Front Lip - Gloss Black
* Side extensions - Gloss Black
* Rear Roof Spoiler - Gloss Black
* Car needs to stanced 100%
- Not sure if i should go KW Coilies or Koni Shocks and HnR Springs????
* Refresh on the Tail light Laminex
* Refresh on the Front Headlight Laminex and perhaps the DTM Angel Conversion
* Electric Racing Seats for the Front Passenger and Driver sides
* Custom Sound Install - with the help of Spiro and Crew ;-)
Once all of this is done then i will start installing the FBO mods and perhaps the BT again
:thumbs::tiptoe:
It has been a while and its about time for an Update on my baby
From the last time i posted i mentioned that
Next on list is to Collect more of the FBO mods to fit later
- This is still on the go, Only need JB4 and DCI now and maybe the Aluminum Intake Manifold
Perhaps the M4 Bumper install
- Opted not to fit the M4 bumper
- Instead i fitted the M3 bumper
Def the E92 M3 Electrical Mirrors again
- Found a set and fitted to the car
And a Carbon clean
- This still needs to be Done maybe when i decide to buy the Aluminum Intake Manifold onetime
I also got lucky in that i was able to Find my OEM AA FMIC and had that fitted as well as my Custom performance exhaust that was Build by TnT - Tom
- Dual 3" with custom high flow boxes
- Its also has 101mm Silver tailpieces of which i will be replacing with my 101mm Burnt Blue tips i got from Rennzport
I also mentioned that i may want to change the colour of her if not have a blow over done
I had a chat with Moe from CrazyridesDetailers and he advised that he could not restore the paint as it was way too badly damaged.
So the only options i was let with was to ether do a blow over or to change the colour.
After some deliberation i finally pulled the trigger and decided to have the colour changed.
Alot of you know that i have been toying with this idea for ages now and toying as to what colour to go with --Red, Green, Yellow....etc
Finally i found a colour that just caught my eye
Atlantis Blue - Got it from the IndiBlue build that was done over seas.
I approached Custom Spray Worx and they said they would be able to Spray the car for me - I opted to respray as apposed to Wraping.
(Easier to maintain if Scratched)
With the request i asked for Colour change to car as well as Gloss black Accessories
So all Beading were made Gloss black, Rear Performance apron, Roof Fin, Side indicator Makers and M3 Mirror Housing. i also request that we colour code bits of the Engine bay Covers.
I waited a solid month and half before i got her back. i had not seen any progress on her in person, ONLY pictures that were sent to me every now and then.
With nerves kicking and anxiety as to how she would look i could not handle it.
and finally the day came when she was ready and i could go and collect her and boy oh boy i was like a kid on Xmas Day....:inlove::inlove: when i arrived and saw her parked off waiting for me...
Perfection at its best. i could not fault a thing. the job was of highest quality and well worth the wait.
here are some picture of the progress over time and final result.
Some Striped and busing being prepped
Some During the Progress Pictures
AND FINALLY THE END PRODUCT
Just an ARB mod on the rear Brake Light
Next on the to-do list
* General Service
- Oil Change, New Ngk 1 Step Colder Plugs, Filters etc
* Trip to Moe crazyridesdetailer for a Fullhouse (Car will need to cure a bit longer before though)
- Full Detail inside out
- Full Engine bay Clean up
- Rim Clean up
- Full 5 Yr Ceramic Coating
* Carbon clean (Still undecided if i will DIY or take in )
* Vosteiner Front Lip - Gloss Black
* Side extensions - Gloss Black
* Rear Roof Spoiler - Gloss Black
* Car needs to stanced 100%
- Not sure if i should go KW Coilies or Koni Shocks and HnR Springs????
* Refresh on the Tail light Laminex
* Refresh on the Front Headlight Laminex and perhaps the DTM Angel Conversion
* Electric Racing Seats for the Front Passenger and Driver sides
* Custom Sound Install - with the help of Spiro and Crew ;-)
Once all of this is done then i will start installing the FBO mods and perhaps the BT again
:thumbs::tiptoe:
What a great transformation - Loved this colour ever since I first saw it years ago on an individual E90 M3.. Did you take some inspiration from this build: https://www.autoevolution.com/news/...tis-blue-bmw-335i-photo-gallery-81989.html..?
Much prefer the look of yours, gloss is king! Really love the finished product, thanks for sharing..
Much prefer the look of yours, gloss is king! Really love the finished product, thanks for sharing..
