-
Read the WELCOME ALL BMWFANATICS post.
Psypher13 335i N54 e92 DCT Build
- Thread starter Psypher13
- Start date
Psypher13
Active member
OLA Gents
Just an Update
As i mentioned after all that was done to get car running again
A group of us was to head to KAR performance over the weekend which we did.
Was a nice catch up with some mates. we all put our cars on the Dyno to see what they were doing - some good figures all round of which i am sure they gents will post n due time....
:clapper:
With regards to my 'Beast' these are the figures we managed with JB4 Map 3 + Pump Fuel
..............................372.5wkw & 630nm.........................................
so was pretty happy with this considering all that she has been through
Still some more TLC, so will source a stage 2 lpfp and install soon so i can play around with Eth + a JB4 Map 6.
Just an Update
As i mentioned after all that was done to get car running again
A group of us was to head to KAR performance over the weekend which we did.
Was a nice catch up with some mates. we all put our cars on the Dyno to see what they were doing - some good figures all round of which i am sure they gents will post n due time....
:clapper:
With regards to my 'Beast' these are the figures we managed with JB4 Map 3 + Pump Fuel
..............................372.5wkw & 630nm.........................................
so was pretty happy with this considering all that she has been through
Still some more TLC, so will source a stage 2 lpfp and install soon so i can play around with Eth + a JB4 Map 6.
Tareeq
Active member
Psypher13 said:OLA Gents
Just an Update
As i mentioned after all that was done to get car running again
A group of us was to head to KAR performance over the weekend which we did.
Was a nice catch up with some mates. we all put our cars on the Dyno to see what they were doing - some good figures all round of which i am sure they gents will post n due time....
:clapper:
With regards to my 'Beast' these are the figures we managed with JB4 Map 3 + Pump Fuel
..............................372.5wkw & 630nm.........................................
so was pretty happy with this considering all that she has been through
Still some more TLC, so will source a stage 2 lpfp and install soon so i can play around with Eth + a JB4 Map 6.
Just read the entire thread and boy oh boy I must say I'm blown out the water. Kudos to you for sticking it out and being the person you are, may your business flourish and grow from strength to strengh :clapper: and those numbers well let's be honest that's some strong witchcraft going on there for just pump :cartel:
Psypher13
Active member
Update
So since all the fixes to try and get my Beast up to spec again, i ran into some error with transmission overheating. did some research and with the help of some forumites advise had the car checked out to find that the Radiator had a bad leak. So now to source and replace the radiator. I called around and the prices where all Killers for a new OEM radiator. with the Help of some good mates i managed to procure a BMW OEM radiator at a stealer price...
:ty: guys
I proceeded to book the Car in with John From Leo - Bosch Service center to install for me. A job weldone by John and His team
Broken Radiator
Car striped from Part
New OEM Radiator
After install i drove to work in Midrand and Oil temps did not even come close to teh 120 mark - Sat at 100 on oil gauge all the way to work
:coolShake:
So since all the fixes to try and get my Beast up to spec again, i ran into some error with transmission overheating. did some research and with the help of some forumites advise had the car checked out to find that the Radiator had a bad leak. So now to source and replace the radiator. I called around and the prices where all Killers for a new OEM radiator. with the Help of some good mates i managed to procure a BMW OEM radiator at a stealer price...
:ty: guys
I proceeded to book the Car in with John From Leo - Bosch Service center to install for me. A job weldone by John and His team
Broken Radiator
Car striped from Part
New OEM Radiator
After install i drove to work in Midrand and Oil temps did not even come close to teh 120 mark - Sat at 100 on oil gauge all the way to work
:coolShake:
Psypher13
Active member
Sup Gents
Well - as we all know i love the Dyno and where better to go and have some fun than the Rennzport Dyno Day this past Saturday at HM Auto.
Prepped car and headed off to HM Auto at 9:30am
Registered and joined the line
Waited eagerly to put the beast on the rollers
Eventually - waiting time up and time to Mount her on the Dyno
1st run on dyno was sorry to say HORSE SHIT
Only hit 359.3wkw & 588nm
This really put me in a bad mood considering i went and prepped car at KAR Performance on Thursday where i Hit a Wopping 395.9wkw & 691nm
So you can really imagine my Disappointment
Below is Graph from KAR Performance - 395.9wkw & 691nm
Below is 1st Run Graph from HM Auto - 359.3wkw & 588nm
after this i was set on hitting my bench mark, so went and loaded a different flash on my car and tweaked the Setting slightly
(Dumb @ss me had my MHD flash which is locked so boost does not go up with JB settings - heheheheheh)
(Shout out to RENNZPORT - Charlse assisted me with some tweaks)
Re-Registered and Joined the line again :tiptoe:
Bitting my nails we put her back on the dyno and said lets do this shite
Well those that where there saw what a happy camper i was....:cartel:
We hit a Massive 408.3wkw & 716nm
with all the excitement of hitting these figures i did not realise again i was oblivious of my settings of which i could have pushed up and gained a few more ponies - :skit:
Never the less i was over the moon with my achievement taking in to consideration where the car was and what i have done to try and get her back to spec. (Still loads to do - all in good time)
But all in all a days worth of fun & excitement with some great old friends and new friends .
Well done to RENNZPORt on a great event...:clapper:
Well - as we all know i love the Dyno and where better to go and have some fun than the Rennzport Dyno Day this past Saturday at HM Auto.
Prepped car and headed off to HM Auto at 9:30am
Registered and joined the line
Waited eagerly to put the beast on the rollers
Eventually - waiting time up and time to Mount her on the Dyno
1st run on dyno was sorry to say HORSE SHIT
Only hit 359.3wkw & 588nm
This really put me in a bad mood considering i went and prepped car at KAR Performance on Thursday where i Hit a Wopping 395.9wkw & 691nm
So you can really imagine my Disappointment
Below is Graph from KAR Performance - 395.9wkw & 691nm
Below is 1st Run Graph from HM Auto - 359.3wkw & 588nm
after this i was set on hitting my bench mark, so went and loaded a different flash on my car and tweaked the Setting slightly
(Dumb @ss me had my MHD flash which is locked so boost does not go up with JB settings - heheheheheh)
(Shout out to RENNZPORT - Charlse assisted me with some tweaks)
Re-Registered and Joined the line again :tiptoe:
Bitting my nails we put her back on the dyno and said lets do this shite
Well those that where there saw what a happy camper i was....:cartel:
We hit a Massive 408.3wkw & 716nm
with all the excitement of hitting these figures i did not realise again i was oblivious of my settings of which i could have pushed up and gained a few more ponies - :skit:
Never the less i was over the moon with my achievement taking in to consideration where the car was and what i have done to try and get her back to spec. (Still loads to do - all in good time)
But all in all a days worth of fun & excitement with some great old friends and new friends .
Well done to RENNZPORt on a great event...:clapper:
General.Massacre
///Member
Epic figures Shayne, really a great achievement 
good luck with the chasing more...
good luck with the chasing more...
