-
Read the WELCOME ALL BMWFANATICS post.
Mark's E82
- Thread starter M@rk
- Start date
Silverbird_96kw
///Member
raise:Where are the updates?
M@rk
Member
I managed to finally bought a INPA Cable form a fanatic and he had a Samsung K zoom up for sales as well so i grabbed both since my A5 doesn't support OTG.
Luckily I own a C-Teck batter charger so I have all the requirements to load a MHD software ,Downloaded MHD on the phone,bought the flasher module and stage 1 file.
Also forgot to post these I fitted DCI , They sound awesome now with the little bit more boost added .
Luckily I own a C-Teck batter charger so I have all the requirements to load a MHD software ,Downloaded MHD on the phone,bought the flasher module and stage 1 file.
Also forgot to post these I fitted DCI , They sound awesome now with the little bit more boost added .
M@rk
Member
I haven't updated in a while now , i have done some more mods and maintenance to the 1er.
Replaced the water pump and Thermostat + 6 new spark plugs at 102 000 km
Fitted down pipe and Full exhaust (Straight Pipe) Tmss build the exhaust system down pipes are from Mnr turbo.
Bought an ER Charge pipe from a forum member, initially it was chrome , i didn't like like look of the chrome and decided to spray them matte black with rustoleum black rubber spray similar to plastidip , looks like stock other than the silicone and t bolt clamps
After all the mods was fitted I loaded a new file currently running Mhd Ots stage 2 , So far i am very happy whit the performance
Ran a 13.2 at Tarlton friday night street to strip with street tyres and 10% Ethanol.
Replaced the water pump and Thermostat + 6 new spark plugs at 102 000 km
Fitted down pipe and Full exhaust (Straight Pipe) Tmss build the exhaust system down pipes are from Mnr turbo.
Bought an ER Charge pipe from a forum member, initially it was chrome , i didn't like like look of the chrome and decided to spray them matte black with rustoleum black rubber spray similar to plastidip , looks like stock other than the silicone and t bolt clamps
After all the mods was fitted I loaded a new file currently running Mhd Ots stage 2 , So far i am very happy whit the performance
Ran a 13.2 at Tarlton friday night street to strip with street tyres and 10% Ethanol.
M@rk
Member
ShaunB said:
The Mhd files are smooth and consistent for the money its probably the best bang for buck not sure what power its making now but would like to get it dyno'd
I cant really comment on the fuel consumption as I don't driver the car during the week only weekends my wife drives it daily she is averaging on +-14 km/l .
When i drive it goes to 18-19 km/L :thumbdo:
osiris
///Member
Nice mods so far and car is looking great.
The MHD map is great although I would suggest setting it to linear throttle response. I didn't do that when I tried the stage 2 map a few months back and it made the car great for putting foot on the highway or pulling off like a rocket but for everyday driving I can't think of anything worse. it applies like 85% throttle at 30% pedal movement. Made the car very erratic.
Otherwise it makes some proper power there is no denying that! I only used the map for 2 days and then loaded back to stock as my o2 sensor was messing with my AFR's so I would rather have a 100% mechanically sound car before pushing up boost.
:thumbs:
The MHD map is great although I would suggest setting it to linear throttle response. I didn't do that when I tried the stage 2 map a few months back and it made the car great for putting foot on the highway or pulling off like a rocket but for everyday driving I can't think of anything worse. it applies like 85% throttle at 30% pedal movement. Made the car very erratic.
Otherwise it makes some proper power there is no denying that! I only used the map for 2 days and then loaded back to stock as my o2 sensor was messing with my AFR's so I would rather have a 100% mechanically sound car before pushing up boost.
:thumbs:
Silverbird_96kw
///Member
Loving this car :cartel:
Dewald Basson
///Member
:bravo:
Similar threads
