lucian
Member
Iceman007 said:How is the plug on that Hedgehog resistor on the cars loom. If its a bit melted its better to replace the plug and pins. I saw somwhere that the arcing and bad contact on the pins cause the plug to melt a bit and cause damage on the inside of the resistor for heat travels through the pin to the PC-Board in the resistor and cause damage. I replaced the Plug and Pins on my car and mine is still going perfectly.
If you want the part numbers let me know for BMW batle to find it but I found it
Pins Part number you need 4 of 61131376206 and 1 of 61131376202 item 9 in the link http://www.realoem.com/bmw/showparts.do?model=ET36&mospid=47639&btnr=61_1296&hg=61&fg=15
The plug housing P/N is 61131383516 but ill have to double check for you
Thanks pal. Will keep these in case I need them.
The plugs and housing is still intact. I did feel that the old one that I put back to test got very hot and it is fully aluminium while the newer one is black plastic at the back. Will post some pics later.