M
Mike1
Guest
Good Morning Guys
Today I present to you a Ford Territory in flat black.
My client (A fellow fanatic) booked the car in for a one day Enhancement, a spruce up on a car that was already in very good condition to begin with.
On arrival the car was a little dusty but nothing too hectic:
Using a mixture of Maxi Suds and APC I scrubbed the mag wheels and arches before foaming the entire car and allowing it a moment to dwell.
The car was then washed by hand and sprayed down with the High Pressure Hose.
At this point I knew the car was going to be a pleasure to work on, notice the beading on the bonnet? This car is very much looked after.
I pulled the monster into the garage and attacked the paint using a firm polishing pad, Chemical Guys Nano Polish and in some areas where the car had been sprayed also mixed in some Chemical Guys Number 1 Polish to refine the finish.
This left me with the following finish:
No swirling, no holograms not even misting. :joy:
I then made use of Chemical Guys EZ Creme Glaze which really bought the colour and depth alive.
And then topped that off with some Smart Wax giving the car two layers.
The exterior plastics, arches and tyres were dressed and glass cleaned with the exhaust tips cleaned up nicely.
The interior was vacuumed and neatened up with the leather moisturized.
Happy with the final touches we pulled the car outside and did some after shots.
This just goes to show, even if you think your car is perfect it is not always the case... There is always a way to improve the finish and that is what Definitive Detailing does best.
What do you think?
Mike
Today I present to you a Ford Territory in flat black.
My client (A fellow fanatic) booked the car in for a one day Enhancement, a spruce up on a car that was already in very good condition to begin with.
On arrival the car was a little dusty but nothing too hectic:
Using a mixture of Maxi Suds and APC I scrubbed the mag wheels and arches before foaming the entire car and allowing it a moment to dwell.
The car was then washed by hand and sprayed down with the High Pressure Hose.
At this point I knew the car was going to be a pleasure to work on, notice the beading on the bonnet? This car is very much looked after.
I pulled the monster into the garage and attacked the paint using a firm polishing pad, Chemical Guys Nano Polish and in some areas where the car had been sprayed also mixed in some Chemical Guys Number 1 Polish to refine the finish.
This left me with the following finish:
No swirling, no holograms not even misting. :joy:
I then made use of Chemical Guys EZ Creme Glaze which really bought the colour and depth alive.
And then topped that off with some Smart Wax giving the car two layers.
The exterior plastics, arches and tyres were dressed and glass cleaned with the exhaust tips cleaned up nicely.
The interior was vacuumed and neatened up with the leather moisturized.
Happy with the final touches we pulled the car outside and did some after shots.
This just goes to show, even if you think your car is perfect it is not always the case... There is always a way to improve the finish and that is what Definitive Detailing does best.
What do you think?
Mike
