135 N55 DCT Dyno Run

Zaza

Member
1SickG6 said:
Racetec dyno is flywheel kw...


My 2013 135 dct makes 249kw 450 nms stock at dynotech. . I'd like to run this car...



The owner Mansoor, told me its wheel.


Killa said:
Zaza said:
Speedy said:
I know Dynotech reads Flywheel power, in fact Most Dynos in CT that I have been to, Dynotech, Topend and Ferroli have all given me Fly wheel figures, seems to be the standard down here.

Not to try and rain on your parade.

Dynotech is able to give both readings, I've tested my far share of dynos in the Cape back in my focus ST days. we were dyno sluts , and that was not the standard.


Drama said:
:roflol::roflol::roflol:

I'm driving my STOCK 2013 DCT 135i down to CT just to put it on this dyno. Will make 200000wkw and I will be happy with life.

I take it , your cars older then you.


awesome figures there zaza :clapper:
ur friend's name not perhaps nic?



He commented about his car in this thread lol.


1SickG6 said:
Drama said:
1SickG6 said:
Racetec dyno is flywheel kw...


My 2013 135 dct makes 249kw 450 nms stock at dynotech. . I'd like to run this car...



You forgot to mention PPK.:crazylaugh:



Because so did he :smashScreen: :biglol:



I'm sure he will be keen, I will be too. :YesNo:

How's the weather this weekend ?
 

Sherwin@xcede

BMWFanatics Advertiser
Official Advertiser
Zaza said:
SKYF said:
Those look like flywheel power.

Wheel my man, my sick n55 made 203wkw after him.

It says ENGINE POWER on the dyno graph bud!


And the engine drag (pink line) is around 55kw at peak & 60kw at redline. So you subtract that from the engine power to get wheel power. Works out to around 190wkw.
 

Zaza

Member
Sherwin@xcede said:
Zaza said:
SKYF said:
Those look like flywheel power.

Wheel my man, my sick n55 made 203wkw after him.

It says ENGINE POWER on the dyno graph bud!


And the engine drag (pink line) is around 55kw at peak & 60kw at redline. So you subtract that from the engine power to get wheel power. Works out to around 190wkw.



I CAN read man lol , okay you guys made me confirm again with the owner. Its fly, his first reading is wkw which was 200 wkw then converted to 244 fkw


You right!


1SickG6 said:
No idea not in cape town this weekend let's do it tonight :tiptoe:

Hope I get the same offer as soon as my cab is back:coolShake:
 

Speedy

Member
Well done for confirming and taking it on the chin, many a time have these dyno threads ended badly, so big ups.
 

Zaza

Member
Speedy said:
Well done for confirming and taking it on the chin, many a time have these dyno threads ended badly, so big ups.

I just don't take it personally :coolShake: forums are ment for learning
 

1SickG6

Member
Fully agreed bro! Sure lemme know when you ready for some fun at our private test track :rollsmile:


Firoze_D said:
1 sick g6. ...always a cracker [FACE WITH TEARS OF JOY]

Hahaha ey firi you know this is my department :rollsmile:
Will put special PPK :tiptoe:
 

Zaza

Member
1SickG6 said:
Fully agreed bro! Sure lemme know when you ready for some fun at our private test track :rollsmile:


Firoze_D said:
1 sick g6. ...always a cracker [FACE WITH TEARS OF JOY]

Hahaha ey firi you know this is my department :rollsmile:
Will put special PPK :tiptoe:



For sure Darian. :cartel:
 

Javbrat-wp

Member
wow some nice figures there:praise::praise:

seems like it could possibly have ppk2' . That figure highly likely is flywheel power. and also i must say even with a ppk it would need fuel to throw that figure out.

no 2 dyno's are the same but a small comparison .

my car is a dct n55 it made bone stock on experience dyno :
217kw in stock form.
after ppk2 : 233kw
after ppk2 and nf with pump fuel it made around 239kw. this is fly wheel power.

if the vin number says no ppk then, hey the dyno is rather very happy or the car maybe built on a wednesday:praise::praise:
 

Drama

Member
Javbrat-wp said:
wow some nice figures there:praise::praise:

seems like it could possibly have ppk2' . That figure highly likely is flywheel power. and also i must say even with a ppk it would need fuel to throw that figure out.

no 2 dyno's are the same but a small comparison .

my car is a dct n55 it made bone stock on experience dyno :
217kw in stock form.
after ppk2 : 233kw
after ppk2 and nf with pump fuel it made around 239kw. this is fly wheel power.

if the vin number says no ppk then, hey the dyno is rather very happy or the car maybe built on a wednesday:praise::praise:

Did you read all the posts? OP later confirmed that it was in fact fkw


Sent from my iPad using Tapatalk
 

Javbrat-wp

Member
Drama said:
Javbrat-wp said:
wow some nice figures there:praise::praise:

seems like it could possibly have ppk2' . That figure highly likely is flywheel power. and also i must say even with a ppk it would need fuel to throw that figure out.

no 2 dyno's are the same but a small comparison .

my car is a dct n55 it made bone stock on experience dyno :
217kw in stock form.
after ppk2 : 233kw
after ppk2 and nf with pump fuel it made around 239kw. this is fly wheel power.

if the vin number says no ppk then, hey the dyno is rather very happy or the car maybe built on a wednesday:praise::praise:

Did you read all the posts? OP later confirmed that it was in fact fkw


Sent from my iPad using Tapatalk


hi , yea i did read it and I'm saying even if fly wheel power its still very strong for a bone stock car ..
 

Zaza

Member
Javbrat-wp said:
Drama said:
Javbrat-wp said:
wow some nice figures there:praise::praise:

seems like it could possibly have ppk2' . That figure highly likely is flywheel power. and also i must say even with a ppk it would need fuel to throw that figure out.

no 2 dyno's are the same but a small comparison .

my car is a dct n55 it made bone stock on experience dyno :
217kw in stock form.
after ppk2 : 233kw
after ppk2 and nf with pump fuel it made around 239kw. this is fly wheel power.

if the vin number says no ppk then, hey the dyno is rather very happy or the car maybe built on a wednesday:praise::praise:

Did you read all the posts? OP later confirmed that it was in fact fkw


Sent from my iPad using Tapatalk


hi , yea i did read it and I'm saying even if fly wheel power its still very strong for a bone stock car ..


Finally some one sees the light , lol my N55 6AT made 224 kW and 469nm on the same dyno.
 

Zaza

Member
Javbrat-wp said:
Drama said:
Javbrat-wp said:
wow some nice figures there:praise::praise:

seems like it could possibly have ppk2' . That figure highly likely is flywheel power. and also i must say even with a ppk it would need fuel to throw that figure out.

no 2 dyno's are the same but a small comparison .

my car is a dct n55 it made bone stock on experience dyno :
217kw in stock form.
after ppk2 : 233kw
after ppk2 and nf with pump fuel it made around 239kw. this is fly wheel power.

if the vin number says no ppk then, hey the dyno is rather very happy or the car maybe built on a wednesday:praise::praise:

Did you read all the posts? OP later confirmed that it was in fact fkw


Sent from my iPad using Tapatalk


hi , yea i did read it and I'm saying even if fly wheel power its still very strong for a bone stock car ..


Finally some one sees the light , lol my N55 6AT made 224 kW and 469nm on the same dyno. The force is strong with this one.
 

UpNcOmiNg!

Events Organiser
When my car comes down FINALLY,should it make it here, I too will dyno there.
Can then compare KAR/FR&R and this dyno.
 

Zaza

Member
UpNcOmiNg! said:
When my car comes down FINALLY,should it make it here, I too will dyno there.
Can then compare KAR/FR&R and this dyno.

I will organize you the run no problem :coolShake: just PM me.
 
Top