-
Read the WELCOME ALL BMWFANATICS post.
E81 Car Computer (56k Warning)
- Thread starter brukutu
- Start date
andrewbuch
///Member
Sounds like its coming along nicely
Once its done you must total up everything so you can work out a final price & you can start installing it into other guys cars..
Once its done you must total up everything so you can work out a final price & you can start installing it into other guys cars..
DonovanPorter
///Member
this is going to be an awsome addition to the 1 going to kick ass :thumbsup:
Hi Brukutu,
I am also trying to install a CID (with a MIO V735 inside) on a E82 (120i M-sport), but I am stuck at the connection pins. Found some advice in another bmw forum: http://www.1addicts.com/forums/showthread.php?t=286884 , where it is explained that
CID plug: -> radio plug
pin 1 : terminal 30 (plus) -> Radio = pin 15 (red/green - thick cable)
pin 3 : terminal 31 (minus) -> Radio = pin 12 (brown - thick cable)
pin 5 : K_CAN High -> Radio = pin 11 (orange/green)
pin 6 : K_CAN Low -> Radio = pin 9 (green)
Now, if I look at the back of the radio, I see two sequence of 12 pins each (numbered 1 to 12 each), and I do not understand how to interpret the above information. If you could post a picture of the connections when you're done with them, I would be extrrrrreeeeemely grrrrrateful!!!
Cheers :wave:, aj
I am also trying to install a CID (with a MIO V735 inside) on a E82 (120i M-sport), but I am stuck at the connection pins. Found some advice in another bmw forum: http://www.1addicts.com/forums/showthread.php?t=286884 , where it is explained that
CID plug: -> radio plug
pin 1 : terminal 30 (plus) -> Radio = pin 15 (red/green - thick cable)
pin 3 : terminal 31 (minus) -> Radio = pin 12 (brown - thick cable)
pin 5 : K_CAN High -> Radio = pin 11 (orange/green)
pin 6 : K_CAN Low -> Radio = pin 9 (green)
Now, if I look at the back of the radio, I see two sequence of 12 pins each (numbered 1 to 12 each), and I do not understand how to interpret the above information. If you could post a picture of the connections when you're done with them, I would be extrrrrreeeeemely grrrrrateful!!!
Cheers :wave:, aj
brukutu
///Member
alphajoe said:
Hi. I will most definatelly will.
As far as i understand. pin 1 and 3 and positive and ground
now, you have to solder 4 wires. one on pin 1, one on pin 3, one on pin 5, one on pin 6
Have yet to do it.
Yes, i have read all those threads where you got your info from.
I have not yet got a CID ;(
I bought one from ebay from germany, still waiting on delivery.
From what i understand, its very easy.
Speaking to someone who did it, here is a copy of some emails. Let me know if you manage.
Also, I know someone who modified the CID pcb, so it goes up on HIGH and down on LOW (groud).
THat way its easy to control it. He doesnt wanna reply to my emails as i didnt buy his CID. lol but you could five it a shot.
UPDATE #1[/align]
Update post #1 with new pictures
andrewbuch
///Member
Might I make a suggestion?
When you update your first post, can you include the date you updated it? Will make it easier to navigate to & find.
Cheers
Andrew
When you update your first post, can you include the date you updated it? Will make it easier to navigate to & find.
Cheers
Andrew
Similar threads
