bmw 700 hans stuck replica

[bettyboob58]

Hi guys,
Here are a few photos of my bmw700 Hans Stuck replica,I am sure a lot of you guys have seen it at shows before,but the real reason for posting it is that i have another one that i want to start racing in historics and will post the build on this site any advice from you guys will be appreaciated.Here are a few photos of the road car:rollsmile:

 

[Bernard///M3]

Very Nice.

Only advice is
JUST DO IT!!!!

raise:

 

[GoCart]

That is awesome. :inlove:

I love the historic series, the best motorsport class in SA as far as I am concerned….

Fanatics pit crew? :fencelook:

 

[Kyle]

Porn not allowed on this site :rollsmile:

 

[ChefDJ]

Porn not allowed on this site :rollsmile:

Shoosh you, we want MORE!!! :inlove:

 

[bettyboob58]

Hi all, here goes first i will tell you guys about historic rules in the pre66 legends that i will be racing in.
The engine must be same make (bmw car bmw engine)
same config 2cylinder r60 bike as per original car,my car will be 2cylinder r1000s bike motor,
original alluminum block
new motor alluminum block
old motor carburators
r1000s fuel injection will change to carbs to conform.
below 1000cc allowed a 50 percent increase in cc(700 mine 1000cc :rollsmile
So here we go some pictures of the car when i got it,had fibreglass panels that is also not allowed (unless those parts are not available then you can get compensation for them) fortunatly i have got the metal off a spare car that i had :=):

 

[Kyle]

:thumbs:

 

[UpNcOmiNg!]

AMAZING!!!! raise:
What a cool little car this is! I am in awe!
love the Hans Stuck replica, what an absolute beaut :inlove:

 

[bettyboob58]

Hi guys,okay next move was to install the motor,the first problem was to get the drive to the wheels I removed the drive shaft from the bmw bike and installed the bike diff straight onto the gearbox to shorten the unit,then turned the diff upside down to change the drive direction as the motor is installed the wrong way round in the car.The next thing is to attatch a sprocket where the wheel normally attaches and to tie the motor gearbox and diff into a unit and remove all possible movement so that when i attach the chain to the drive it cant come off due to any missalignment as you rev under torque,again we have another problem no reverse gear so we attach a flywheel to the sprocket on the diff next to the chain sprocket and will put a geared suv starter motor and when the clutch is engaged a switch will activate and allow me to push a button and engage the starter that will give me a reverse gear for the classic racing i need a reverse gear incase I lose it and end up in the kitty litter and have to get out in reverse.(all these things you have to do to conform)

 

[Dippies]

Very nice :thumbs::thumbs:

 

[herr bmw]

nice build:thumbs:

i would love to see the bike engine in the car and how you got it to work,i did read up that you get a different box(cant remember the name) for bike engines to fit in a car,where it engages reverse(wanted to put a firebalde motor in a beetle)

but if i remember correctly it was auto

anyway good luck with the build,and hope to see this car:thumbs:

 

[bettyboob58]

Hi Herr bmw,
I did find a revesing gearbox that fits in line with your output shaft on the bike transmission but it costs 700pounds and is made by quaiffe
a little expensive for me so i have chosen to make the reverse to operate electricaly with the geared starter motor.The car is quite lite so should be able to move the car in reverse this wont be all the time as i will get the pit crew to push the car :=)::=):if needed,its just to conform to the rule that you have to have a reverse gear

 

[herr bmw]

track use should be okay with the starter

 

[Karthik]

Beautiful work there bud ! One day when I'm older I wanna do something like this. Car's also quite a masterpiece. Never even knew such a kind of BMW existed. Good luck with your ventures I'll be watching you

 

[bettyboob58]

Right guys the starter works and mounted,now have started directing air on the cooling for the bikes heads:joy:

 

[herr bmw]

i wonder if a person could do this for street use,is would love to do this on a beetle:rollsmile:,wonder where i could find out

 

[bettyboob58]

battling to upload pictures, yes you can do this for road use this car will be on the road as well

 

[herr bmw]

would love to see this:thumbs:

 

[CamZo]

I want one... it looks awesome and inspired with history :inlove:

 

[bettyboob58]

Okay looks like the photo shop is working this morning