Auto electrician

[vamudzengi]

Where can I get an auto electrician around Brakpan, Boksburg, and Benoni to fix cigarette lighters on my F10?

I can`t charge my phone anymore with the two ports inside the car. I changed the fuse but it didn't work. Only the one in the trunk is working and I had to buy a 3m cable and run it all the way from the truck for me to charge phones.

The illuminating lights on the gear lever also just switch off once I put in the drive.

 

[Riaad]

Where can I get an auto electrician around Brakpan, Boksburg, and Benoni to fix cigarette lighters on my F10?

I can`t charge my phone anymore with the two ports inside the car. I changed the fuse but it didn't work. Only the one in the trunk is working and I had to buy a 3m cable and run it all the way from the truck for me to charge phones.

The illuminating lights on the gear lever also just switch off once I put in the drive.

maybe consider a powerbank to charge your phone?
its possible that the charger you are using has caused a short.

the leds failing in the gear is a common issue.
simple fix is to order replacement leds (ideally all 5 leds, as the replacements are brighter than OEM), or replace the gear lever.

* you will likely need coding if you opt to replace the gearlever

 

[vamudzengi]

-

 

[vamudzengi]

maybe consider a powerbank to charge your phone?
its possible that the charger you are using has caused a short.

the leds failing in the gear is a common issue.
simple fix is to order replacement leds (ideally all 5 leds, as the replacements are brighter than OEM), or replace the gear lever.

* you will likely need coding if you opt to replace the gearlever

Thanks, these are simpler solutions I never thought of. I got this route.

maybe consider a powerbank to charge your phone?
its possible that the charger you are using has caused a short.

the leds failing in the gear is a common issue.
simple fix is to order replacement leds (ideally all 5 leds, as the replacements are brighter than OEM), or replace the gear lever.

* you will likely need coding if you opt to replace the gearlever

Thanks, these are simpler solutions I never thought of. I will this route.