Hybrid turbo N55 Meth

[nawti1]

Hi gents

Looking for some advice regarding my meth setup.Can anyone advise what size meth nozzle they are using on a hybrid turbo setup on n55?
Currently running single nozzle size 7 making 500hp.I am seeing high IAT up to 122F on a single pull.
Would just like to get an idea of what the other guys are running in terms on nozzle sizes on similiar setups.

Thanks

 

[General.Massacre]

Howsit man,

First and most important question, is where in your charge pipe is the meth nozzle sitting?

a CM7 nozzle size should be OK, but id Upgrade to a CM10 size,
But in all honesty, with Hybrid turbos, i would recommend upgrading your system to run the following:
Port Meth injection (CM2.5 Nozzles in each intake runner)
One Solenoid before on the IN side of the Distribution block (this will cut off immediate flow from being drawn out the nozzles via Intake Vacuum)
One Solenoid on the OUT side of the Distribution block (this will stop the Excess meth sitting in the Line going to the Charge pipe being syphoned into the Closest cylinder)
Line from OUT solenoid to the charge pipe running a CM 7 Nozzle (purely for cooling)

Edit: this is testing that @osiris and I have done on his car trouble shooting the best way to maximize efficiency. Granted his is N54, but the principle remains the same.

 

[nawti1]

Thanks bud ….mine sits in the middle of my cp….I am definitely going to investigate the setup you explained above.Thanks

 

[General.Massacre]

Pleasure man.
as long as the Nozzle is is a bit of a distance away from the TMAP, then thats fine,
what boost you running? may need to go bigger Nozzle then, i think the CM10 would be best to go to..
What intercooler you running?

Contact CoolBoost for info on the Port Meth solution. cant go wrong.

 

[OPC]

Hi gents

Looking for some advice regarding my meth setup.Can anyone advise what size meth nozzle they are using on a hybrid turbo setup on n55?
Currently running single nozzle size 7 making 500hp.I am seeing high IAT up to 122F on a single pull.
Would just like to get an idea of what the other guys are running in terms on nozzle sizes on similiar setups.

Thanks

Morning Nawti1, Sorry if I am derailing the thread but what hybrid setup you running? I am also looking to upgrade my turbo but not sure what options to go for.

 

[nawti1]

Running a Wagner IC
@ OPC running a snail hybrid BB Turbo....

 

[OPC]

Only import available? or does someone local supply Snail

 

[nawti1]

there are local suppliers,but non e of them keep stock so you have to wait for import anyways.

Give me a shout if you need more advice: Zero Seven Two six one one 5641