Ibus and Navcoder

I have just assembled my Ibus interface from Rolf Resler, and connected up to the Ibus together with Navcoder software, what a great combo, Have just programmed my daylight running lights as well as programmed the low beams not to do cold error checking as I have allready fitted Xenons.I now can get rid of the error correction hardware I had installed before to get rid of the low beam error code as a result of the Xenons.
I also fitted a small hour timer to see how long the xenons will last, I know this is basically just a nice to have, but I love to do stuff like this.
Here are some pictures of the Navcoder software running and the Hour timer.
The interface of the Ibus I connected in parallel to the three wires going to the cd shuttle in the boot.

NICE to have is Very Nice to have.

Very nice,

I have a 1997 528i E39. What would this cost me and what will I be able to do with a setup like this?

Truvalu said:

Very nice,

I have a 1997 528i E39. What would this cost me and what will I be able to do with a setup like this?

Click to expand...

The Software you can download at the link below
http://www.siegenthaler.co.nz/NavCoder/index.htm
And here you can order the interface.
I only waited about 6 days and it was in my post box from Germany.
I paid 18 Euros plus 6 Euros courier for the interface,
you can monitor and change a lot of stuff, but the main thing is to be able to adjust your LCM settings (Light control module)
http://www.reslers.de/index.html